51 Research and Design, Electronic Engineers website - Embedded Systems, MCU, DSP, EDA, Test and Measurement, Components, Communications, Power, Microelectronics, Semiconductors

Thursday, December 11th, 2008 at 10:22 | No comments

Categories: Communication Networks

Tags: CAN, The heat inserts pulls out

Short Content:        The CAN transceiver must in the very severe under the working conditions guarantee that the data transmission the reliability, this set the very high request to component's electronic performance. The transceiver usually is between the expensive node component and the CAN main line the only connection, therefore Texas Instruments (TI) Corporation's CAN transceiver SN65HVD1050 has many job safety characteristic speaking of the CAN application specially importantly, for example, the anti-electromagnetism (EM) disturbance, the low EM radiation, noise abatement, the static ...

Thursday, November 20th, 2008 at 01:12 | No comments

Categories: Power Supply

Tags: The heat inserts pulls out

Short Content: 　　Some application situation needs to use a heat to insert pulls out the controller, a circuit breaker or both must use, adapts the bipolarity cocurrent input power source skeleton line. In certain uses inserts hotly pulls out in controller's situation, this kind of request stems from merely to the initial firing current consideration. Must eliminate coupling's stress and the power source skeleton line disturbance, must control the initial firing current. Moreover when some application situation in some power source some ...